High quality sand for sand blasting 

Description

For sandblasting, we offer a selection of different types of sand. All with the high quality as a common denominator.

 

Oven-dried silica sand

Our oven-dried silica sand is a cost-effective sandblasting agent that effectively removes unwanted coating and leaves a clean surface, ready for finishing. The silica sand is available in two grades, suitable for both dry and wet sand blasting.

  • Dansand® no. 50B 0.36-1.00 mm is our best-selling type of sand and is used for concrete, masonry and iron constructions.
  • Dansand® no. 100 0.36-2.00 mm is suitable for stripping rust or fouling from very rough surfaces.

Aludur Aluminum silicate

Aludur Aluminum silicate is a fantastic material for silicosis-free sand blasting and can even be recycled. The product is available in different grain sizes and packaging sizes on request.

 

Nastra copper silicate

Nastra copper silicate (Fe-silicate) is used for silicosis-free sand blasting and is available in different grain sizes and packaging sizes on request.

Specifications

Declaration

Product name: Dansand® no. 50B (0.36-1.00 mm)

Product description: Oven-dried silica sand

Product number: 396820

 

Declared values
PropertiesTest methodExpected valueVariation range
Bulk density – kg/m³DS/EN 1097-314301400-1500
Density – kg/m³DS/EN 1097-626402620-2660
Hardness – MOHS7-
Medium grain size - mm0.48-
Grain shapeRounded edge
SiO2 – %98 %> 96 %

Product name: Dansand® no. 100 (0.36-2.00 mm)

Product description: Oven-dried silica sand

Product number: 210125, 210126, 210150, 211000, 210025

 

Declared values
PropertiesTest methodExpected valueVariation range
Bulk density – kg/m³DS/EN 1097-314501400-1500
Density – kg/m³DS/EN 1097-626402620-2660
Hardness – MOHS7-
Medium grain size - mm0.85-
Grain shapeRounded edge
SiO2 – %98 %> 96 %

Analysis data should be considered as guidance only. The raw material is a natural product whose composition may vary.

 

Storage

Dry, covered and without risk of contamination.

 

Delivery

The products are delivered in bags of 25 kg or 1000 kg big bags. By agreement, some of the products can also be delivered loose in a silo truck.

Environmental information and disposal

Packaging and used sand blasting material should be disposed of in accordance with local requirements.

Additional information

Responsible:

E-mail:

Producer:

Product designation:

Tel:

Item number:

, , , , ,

Variant:
Variants:

Dansand® nr. 100 (0,36-2,00 mm) – 210125, 210126, 210150, 211000, 210025, Dansand® nr. 50B (0,36-1,00 mm) – 396820

Documentation & Application

Application

Sandblasting of surfaces on concrete, masonry and iron structures.

Always perform sandblasting with approved safety equipment. Always follow applicable rules.