DANSAND® Airaid is used to fill holes arising during aeration and as topdressing when reseeding the grass or as winter hardening. DANSAND® Airaid is highly suitable for soil with a high clay content.
Consisting of round-edged and washed silica sand, DANSAND® Airaid has an overweight of coarse grains and is at the upper end of the USGA curve.
Compared to the finer-grained DANSAND Superdres®, the coarse silica sand gives extra stability and improved water permeability in the soil.
Both varieties of topdressing are fine-tuned to give the ideal playing surface. A combination of DANSAND Superdres® for ongoing topdressing and DANSAND® Airaid for deep aeration or plugging will give your grass the perfect growing conditions.
DANSAND® Airaid has a maximum grain size of 1 mm. This makes the topdressing resistant to cutting equipment and minimises the amount of cut grass collected in the cutting boxes – and gives you all the benefits of increased drainage.
Product description: Washed and sifted silica sand
Product number: 400050
Covered and without risk of contamination.
Delivered as bulk.
|Diameter - mm||Passing - w %|
|Category||Diameter - mm||Retained W %|
|Coarse Gravel||> 3.4||0|
|Fine Gravel||2.0 - 3.4||0|
|Very Coarse Sand||1.0 - 2.0||1.0|
|Coarse Sand||0.5 - 1.0||55.4|
|Medium Sand||0.25 - 0.5||43.4|
|Fine Sand||0.15 - 0.25||0.2|
|Very Fine Sand||0.05 - 0.15||0|
|Silt / Clay||< 0.05||0|
|Humus - weight %||0.67|
Analysis data should be considered as guidance only. The raw material is a natural product whose composition may vary.
Used for topping up holes after aeration and as topdressing during reseeding of the grass or as winter hardening